Samsung SMO-211QN - Manual (Page 27)

Eng-27
8. Assemble the assy-case front onto
the case-rear as shown in the
illustration. Fasten the assy-case
front to the case-rear with the
screw (BH M2.6) you removed
earlier.
CASE-REAR
Screw (BH M2.6) ASSY-CASE
FRONT
• Connect the camera cable to the
camera cable jack on the camera,
then connect the other end of
the cable to the monitor's channel
input jack as shown in the illustration.
• Connect the alarm box to the
terminal block, which is located on
the bottom of the camera.
3) CABLE CONNECTION (SOC-P120)