Samsung SMO-211QN User Manual

Page 42

Advertising
background image

Eng-42

5) After setting, move to the main screen by using the MENU BUTTON.

6) Set values will be stored as shown below. It takes 2 or 3 seconds.

On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed.

If the network connection is cancelled or cut, [S] starts blinking.

7) Open your Internet Explorer web browser.

Using a Static (fixed) IP, You may also connect remotely by typing in the IP address of

the SMO-211QN/SMO-150QN, Such as

http://192.168.1.200

* Note : HTTP Port

Set the port to be used when connection to SMO-211QN/SMO-150QN in Internet Explorer

and receive the necessary files for image transmission.

Necessary files for the image transmission.

The port setting is used for various network configuration or a particular port etc.

CAUTION

A port number is reserved for TCP port and HTTP port setting.

Default values should not be changed.

However, if the IP Router is used in a network environment, input proper values with

reference to the IP Router manual.

If the SMO-211QN/SMO-150QN is using a Router, you may also connect remotely by

typing In the WAN

IP Address of the Router and the HTTP port assigned to the SMO-211QN/SMO-150QN.

(here you must type in the port address even if it is the default “80”), such as

http://192.168.1.200:80

06/01/03

13:14:00

NETWORK SETTING

[S] 06/01/01

13:14:00

CAM1

Advertising
This manual is related to the following products: