Snapper 1694923 User Manual

Installation instructions, Bumper kit, Warning

Advertising
background image

1

Installation

Instructions

Bumper Kit

Mfg. No. 1694923

Kit Installation

HOOD REMOVAL

1. Open the hood.
2. Remove the socket and bulbs (A, Figure 2) by twist-

ing the socket counterclockwise and pulling it out of
the bezel (B). Repeat on other side.

3. Rock the hood back slightly and lift hood and grill

assembly (B, Figure 3) off pivot posts (C). Set hood
on clean 4 x 4’s or workbench.

Figure 1. Contents

Kit Contents:

Ref.

Part No.

Qty.

Description

1

1731989A

1

Bumper Assembly

2

1931277

4

Nut, Hex, Flange Lock, 5/16-18

3

1930591

4

Capscrew, Flange Lock,
5/16-18 x 3/4

This kit is to install a bumper onto a Regent / 500 /
2500 / LT-200 Series Lawn Tractor.

1

Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
and disconnect the spark plug wire(s).

WARNING

2

3

2

3

Figure 3. Hood Removal and Installation
A. Hinge Post
B. Hood and Grill Assembly
C. Pivot Post
D. Stop

A

C

B

D

Figure 2. Head Light
A. Socket and Bulbs
B. Bezel

A

B

A

Advertising
This manual is related to the following products: