Samsung DVD-V4800 - Manual (Page 38)

ENG-37
JPEG Playback Program Play & Random Play
Note Note
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the INFO button on the remote control to
display the menu again.
• Press the STOP button to return to the clips menu.
• When playing a Kodak Picture CD, the unit
displays the Photo directly, not the clips menu.
• Every time you push the DVD/M.CARD button, the
system enters the Memory Card mode and the
DVD/CD mode in turn.
- Memory Card mode : Plays the Memory Card
- DVD/CD Mode : Plays the CD-R & Picture CD
CD-R / Memory Card / Picture CD JPEG
• Only files with the “.jpg” and ‘.JPG” extensions can be
played.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
• Memory Card over 2GB use FAT32, which may be
not compatible with this unit.
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 500 images can be stored on a single
CD.
• Kodak Picture CDs are recommended.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
• Konica Picture CD : If you want to see the Picture,
select the JPEG files in the clips menu.
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu.
• QSS Picture CD : The unit cannot play QSS Picture
CD.
• If a number of files in 1 Disc are over 3000, only 3000
JPEG file can be played.
• If a number of folders in 1 Disc are over 300, only
JPEG files in 300 folders can be played.
You can listen to songs randomly or in the desired
sequence.
Up to 20 tracks can be programmed.
This function is available only with Audio CDs.
Before You Begin...
• Set the channel to "3" or use the TV/VIDEO
button on the TV to select the input source.
• Press the DVD button on the remote control to
switch to DVD mode.
1 In STOP mode, press the REPEAT button.
• The Playback Sequence menu will appear.
2 Use ➛ , ❿ buttons to select PROGRAM, and then
press the ENTER button.
• The Selective Play screen will appear.
- Select <RANDOM> and press the ENTER
button to play tracks in random order.
3 Use , ❷ or ➛ , ❿ buttons to select the desired
track (CD), and then press the ENTER button.
• The selected track will be added to the
Program order.
- Press the CLEAR button. The track added last
will be deleted from the Program order.
4 To finish programming and start playback, press the
❿ ll button.
• Tracks will play in the order they are added.
➢
• If the disc tray is opened during programming,
Program Play will be canceled.
• Program Play can be set only when the CD is
in STOP mode.
• To Cancel Programming
- Press the REPEAT or RETURN button.
The program will not be saved and the
program screen will disappear.
• To Cancel Program Play
- During playback or in Stop mode, press
the CLEAR button.
RANDOM PROGRAM
00353A DVD-V4800/XAA-ENG 4/27/04 5:26 PM Page 37