Sony F500 - Manual (Page 16)

16 GB
Gettin
g
Star
ted
3
Reattach the speaker stand by engaging the protrusions on the stand in the holes for
either a vertical or upward angle.
4
Thread the speaker cord though the slit of the stand base to prevent the cord from being
twisted or pinched.
5
Tighten the screws to secure the speaker stand.
Note
• Be careful not to pinch the speaker cords while tightening the screws.
(BDV-F700 only)
For assembling the speakers, refer to “Speaker Installation Guide.”
Assembling the speakers
Vertical or
upward angle
Vertical angle Upward angle
Screws