Sony F500 - Manual (Page 47)

O
th
e
r O
p
era
tions
47 GB
(Audio Return Channel)
The system can receive the digital audio signal
of the TV via an HDMI cable when your TV is
compatible with the Audio Return Channel
function. You can enjoy TV sound via the
system by using just one HDMI cable. For
details, see [Audio Return Channel] (page 55).
(Remote Easy Control)
You can control the basic functions of the
system via the TV remote when the system’s
video output is displayed on the TV screen. For
details, refer to the operating instructions of the
TV.
(Language Follow)
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed after turning
the system off and on.
Setting the Speakers
[Speaker Settings]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select [Setup].
3
Press X/x to select [Audio Settings],
then press .
4
Press X/x to select [Speaker Settings],
then press .
The [Speaker Settings] display appears.
5
Press X/x to select the item, then press
.
Check the following settings.
x [Distance]
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
The speakers in the illustration correspond to the
following:
1 Front left speaker (L)
2 Front right speaker (R)
3 Subwoofer
[Front Left/Right] 3.0 m: Set the front speaker
distance.
[Subwoofer] 3.0 m: Set the subwoofer distance.
Receiving the digital audio
signal of the TV
Operating the system via the
TV remote
Changing the language for the
on-screen display of the TV
A
1
3
2