Sony KDL-19L4000 - Manual (Page 169)

25 GB
Usi
ng MENU
Func
ti
ons
Features menu
You can select the options listed below on the “Features”
menu. To select options in “Settings”, see “Navigating
through menus” (page 21).
Screen
Screen
(only in PC
mode)
Changes the screen format.
Screen Format
For details about the screen format, see page 14.
z
“Auto” is available for PAL and SECAM signals only.
“Normal”: Displays the picture in its original size.
“Full”: Enlarges the picture to fill the display area.
Power Saving Selects the power saving mode to reduce the power consumption of the TV.
“Standard”: Default settings.
“Reduce”: Reduces the power consumption of the TV.
“Picture Off”: Switches off the picture. You can listen to the sound with the picture
off.
RGB Centre Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
z
This option is only available if an RGB source has been connected to the Scarts connectors
/ / AV1 or / / AV2 on the rear of the TV.
PC Adjustment Customizes the TV screen as a PC monitor.
z
This option is only available if a PC signal is received.
“Phase”: Adjusts the screen when a part of a displayed text or image is not clear.
“Pitch”: Enlarges or shrinkes the screen size horizontally.
“Horizontal Shift”: Moves the screen to the left or to the right.
“Vertical Shift”: Moves the screen up or down.
“Power Saving”: When this is set to “On,” turns to standby mode if no PC signal is
received. To return to the TV, press ?/1.
“Reset”: Resets to the factory settings.
Screen
Power Saving
Timer
Standard
Select: Back: Enter: Exit:
Features
Continued