Samsung Tantus HLM 5065W - Manual (Page 54)

Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background. If you wish to continue viewing the poor picture,
you must set the “Blue screen” mode to “Off”.
1 Press the Menu button on the
remote control. Move the joy-
stick down to select SETUP,
then press the joystick to
enter.
2 Move the joystick down to
select Blue Screen.
3 Move the joystick to the right
or left to select “On” or “Off”.
4 Press the Menu button to exit.
Special Features
54
BP68-00030A-4 4/15/05 8:34 PM Page 54