Samsung WM-202 - Manual (Page 54)

53
Stereo / Mono switching - FM
If the FM radio station being listened to has a weak signal, some hiss may
be audible. It is possible to reduce this hiss by forcing the radio to play the
station in mono rather than stereo.
1. Press the Mode button as needed to select the FM mode display and
tune to the required FM station as previously described.
2. Press the Menu button to enter the FM menu list.
3. Rotate the Tuning/Select control until 'Audio setting' is highlighted on
the display. Press the Tuning/Select control to enter the audio setting
mode.
The current setting is indicated with an asterisk.
4. To switch to mono in order to reduce the hiss from a weak FM signal
rotate the Tuning/Select control until 'Yes' is highlighted. Press the
Tuning/Select control to confi rm the setting.
Alternatively, to return to the normal automatic 'stereo or mono' mode
rotate the Tuning/Select control until 'No' is highlighted. Press the
Tuning/Select control to confi rm the setting.
5. Press the Menu button to return to the normal FM mode display.
3-4
2
1
5