Samsung WM-202 - Manual (Page 65)

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri) 64
Brightness control
The brightness of the display can be adjusted for when the radio is in
Stand-by and for when it is in use. If you use the unit in the bedroom, you
may prefer a lower stand-by brightness level than the standard setting.
There are three brightness levels and an off setting.
1. Press the On/Off button to switch on your radio. Access the menu for
the current mode by pressing the Menu button.
2. Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the system settings menu.
Rotate the Tuning/Select control until 'Brightness' is highlighted on
the display. Press the control.
3. To adjust the display brightness when the radio is switched on rotate
the Tuning/Select control until 'Active' is highlighted on the display.
To adjust the display brightness when the radio is in stand-by rotate
the Tuning/Select control until 'Standby' is highlighted.
Press the control to enter the selected brightness adjustment mode.
4. To adjust the brightness level rotate the Tuning/Select control clockwise
to increase the brightness level and anti-clockwise to decrease it.
The backlight level will change as the control is rotated so that you can
see the effect of each setting. Note that the backlight is completely off
at the zero setting. Press the control to confi rm the setting.
Press the Menu button to exit.
When the radio is in Stand-by mode, pressing a button or turning the rotary
control will cause the radio to switch to the Active brightness level for a few
seconds. If the Stand-by brightness level is set to zero (backlight off), it is
still possible to see the time at night by quickly pressing a button.
Display and Audio
2-4
1,4