Samsung SP-D400S - Manual (Page 27)

shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the
maximum and then perform Fine Adjustment again.
Only activated in the PC environment.
1) Auto Adjustment : Used to adjust frequency and phase of PC screen
automatically.
2) Coarse : Used to adjust frequency when vertical lines appear on PC screen.
3) Fine : Used to fine tune the PC screen.
4) Reset : Using this function, you can reset the PC menu settings to the factory
default settings.
Auto
Adjustment
Coarse
Fine
Reset
Zoom You can enlarge a specific part of the screen and can look at that part in detail.
1) Ч1
2) Ч2
3) Ч4
| Input | Picture | Setup | Option |
* Click the Play( )/Stop( ) button in the table below to view the video file.
Screen
Adjustment
Description Play/Stop
Install To tailor the picture to the installation location, you can invert the projected images
vertically/horizontally.
1) Front-Floor : Normal Image
2) Front-Ceiling : Horizontal/Vertical Reversed Image
3) Rear-Floor : Horizontally Reversed Image
4) Rear-Ceiling : Vertically Reversed Image
Lamp Mode Used to set the image brightness by adjusting the amount of light generated by the
lamp.
1) Eco : Using this function, you can adjust the light level of the lamp so that you
Eco