Samsung SW-208 User Manual

Page 8

Advertising
background image

Recommended Disc Types

13

CD-R

Fujifilm, Kodak, Maxell, Mitsubishi, Mitsui, Pioneer, Ricoh,

SKC, Sony, Taiyo Yuden, TDK, Yamaha

CD-RW

Mitsubishi, Ricoh, SKC

12

1

Copy the network drive contents to the hard disk and then from the hard disk
to the CD-R/RW drive.

1

Clean the source CD, if necessary.

2

Create an image file and then copy the image file to the CD-R/RW drive.

3

Check the CD-ROM drive record speed.

There are two recording methods :

Low-speed (file by file)

High-speed (transfer of an image file from the hard disk)

4

If the transfer speed of the CD-ROM drive is slower than the record speed,
reduce the record speed.

1

Before starting to record, determine the audio and transfer speeds by using
the [Tool/System Test] option in Easy CD Creator. Then, choose an
appropriate record speed. If the audio speed is less than 2X, first create an
image file on the hard disk.

2

To perform a record test before copying to a CD, select the [Test/Copy]
option.

3

If the test fails, try recording on another disc.

4

The CD-R/RW drive does not support high-speed recording to CD-RW discs
above 8X. Discs above CD-RW 8X use different rewriting methods and can
only be read via the CD-R/RW drive.

5

When viewing CD-RW 2X properties or performing a full erase, the “WRITE
SPEED 4X DISPLAY” error is displayed unexpectedly. The CD-R/RW drive
has been operating continuously for 20 minutes after completing the full erase.

Network Drive

CD-ROM Drive

Others

Advertising
This manual is related to the following products: