Sony ZX6 - Manual (Page 14)

14 GB
Notes
• This system can playback MP3 audio tracks in the
format of MPEG 1 Audio Layer 3, MPEG 2 Audio
Layer 3 and MPEG 2.5 Audio Layer 3.
• This system can playback Multi Session discs when
an MP3 audio track is located in the first session.
Any subsequent MP3 audio tracks, recorded in the
later sessions, can also be played back.
• When naming the MP3 audio tracks, be sure to add
the file extension “.MP3” to the file name.
• If you save up the extension “.MP3” to a track other
than MP3 audio tracks, the system cannot recognize
the track properly and will generate random noise
that could damage your speakers.
• You are recommended not to save other type of
tracks or unneccessary album on a disc that has MP3
audio tracks.
• The disc recorded with complicated tree structure
takes a longer time to start playback.
• When the disc is loaded, the system reads all the
tracks in that disc. If there are many albums or non
MP3 audio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
track to start playback.
• An album that does not include an MP3 audio track
is skipped.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot playback, sound
interruptions, and noise.
Tips
• When switching to “CD” function from “TUNER”
function by pressing NX, a longer time may be
required to access the disc. In this case, set “CD
POWER ON” by CD power manage function
(page 17).
• If you press NX while the system is turned off, the
system turns on automatically and “CD” is selected
as a function. Then, playback starts if there is a disc
in the disc tray (One Touch Play).
• If you press CD on the remote while the system is
turned off, the system turns on automatically and
“CD” is selected as a function.
You can playback all the tracks or a single track
on a disc repeatedly.
Press REPEAT repeatedly until “REP” or
“REP1” lights up in the display.
REP: All the tracks on the disc, or all the tracks
in the album* are played back repeatedly
up to five times.
REP1: A single track is played back repeatedly
until “REP1” is canceled.
* When “ALBM” or “ALBM SHUF” is selected for
MP3 audio tracks.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP1” disappear from the display.
Note
You cannot select “REP” and “ALL DISCS SHUF” at
the same time.
Playing repeatedly
— Repeat Play