Sony ZX6 - Manual (Page 34)

34 GB
C CD DIGITAL OUT jack
Use a digital optical cable (square, not supplied)
to connect the digital input of the optional MD
deck to this jack. You can then record digital
audio from this system.
Note
There is no digital audio output from this jack during
playback of MP3 audio tracks.
D VIDEO/MD OUT L/R jacks
Use audio cords (not supplied) to connect the
audio input of the optional component (such as
VCR or an MD deck) to these jacks. You can
then output audio to that component from this
system.
Note
There is no audio output from this jack during VIDEO
or MD function when GAME MIXING is turned off.
E VIDEO/MD IN L/R jacks
Use audio cords (not supplied) to connect the
audio output of the optional component (such as
VCD or MD deck) to these jacks. You can then
output audio through this system.
F VIDEO OUT jack
Use a video cable (not supplied) to connect the
video input of TV to this jack.
G PHONO IN L/R jacks
Use audio cords (not supplied) to connect the
audio output of the turntable to these jacks. You
can then output audio through this system.
Notes
• If you want to switch back to “VIDEO” function,
repeat step 2 and 3 of “Listen to a connected MD
deck”.
• If the sound is distorted or too loud when “VIDEO”
function is selected, switch to “MD” function. (See
“Listen to a connected MD deck”).
• Use buttons on the system for the operation.
Listening to audio from a
connected component
To Do this
Listen to a
connected VCR 1 Connect the audio cords.
See “Hooking up optional
components” on page 33.
2 Press FUNCTION repeatedly
until “VIDEO” appears in the
display. Start playing the
connected VCR.
Listen to a
connected MD
deck 1 Connect the audio cords.
See “Hooking up optional
components” on page 33.
2 Press ?/1 to turn off the system.
3 Hold down FUNCTION and
press ?/1 . Release ?/1 first,
then release FUNCTION. The
system turns on automatically
and switches the function from
VIDEO to MD. Start playing the
connected MD deck.
Listen to the
sound of a
connected video
game player 1 Press GAME.
2 Select the preset effect.
See “Selecting the preset effect”
on page 22.
Listen to a
connected
turntable 1 Connect the audio cords.
See “Hooking up optional
components” on page 33.
2 Press FUNCTION repeatedly
until “PHONO” appears in the
display. Start playing the
connected turntable.