Troubleshooting – Sony SLV-E780EN/EG User Manual

Page 61

Advertising
background image

61

Additional Information

Remedy

• Connect the mains lead to the mains securely.

• Moisture condensation occurs. Turn the power off,

unplug the mains lead and leave the VCR to dry for
over one hour.

• The clock stops if the VCR is disconnected from the

mains for more than one hour. Reset the clock (and
timer).

• Make sure the TV is set to the video channel. If you

are using a monitor, set it to video input.

• If the VCR is connected to the TV only with the aerial

cable, make sure that RF MODULATOR in the
OPTIONS menu is set to ON.

• Adjust the tracking with the TRACKING +/– buttons.
• The video heads are dirty (see below). Clean the video

heads using the Sony T-25CLD, E-25CLDR, or T-
25CLW video head cleaning cassette. If these cleaning
cassettes are not available in your area, have the heads
cleaned at your nearest Sony service facility (a
standard service charge will be required). Do not use a
commercially available liquid type cleaning cassette
other than Sony’s, as it may damage the video heads.

• The video heads may have to be replaced. Consult

your local Sony service facility for more information.

• Adjust the vertical hold control on the TV or monitor.

• The tape is defective. Use a new tape.

• When you play a tape with the same sound recorded

on both the hi-fi and normal sound tracks, make sure
AUDIO MIX in the OPTIONS menu is set to OFF.

Symptom

The ON/STANDBY switch
does not function.

The power is turned on but the
VCR does not operate.

The clock has stopped and
“–:– –” lights in the display
window.

The playback picture does not
appear on the TV screen.

The picture is not clear.

The picture rolls vertically
during picture search.

The picture has no sound.

The sound is unstable or has an
echo.

Troubleshooting

If you have any questions or problems not covered below, please consult your nearest
Sony service facility.

Clock

Additional Information

Power

• Normal picture

• No picture (or

black & white
screen appears)

• Unclear picture

• Rough picture

Symptoms caused by contaminated video heads

initial

contamination

terminal

Playback

continued

Advertising