Basic hookups and s e ttings, Press enter, Press m / m to select an option – Sony RDR-GX7 User Manual

Page 13: Press enter when “finish” appears

Advertising
background image

13

Step 7: Easy Setup

Basic Hookups and S

e

ttings

n

Press ENTER.

The Setup Display for the LINE 3/DECODER jack
appears.

o

Press

M/m to select an option.

Select “Yes” if you will connect a decoder to the
LINE 3/DECODER jack, or select “No” if you will
not connect a decoder.

p

Press ENTER.

The Setup Display for selecting the type of video
signal output from the LINE1-TV jack appears.

q

Press

M/m to select the type of signal you

want to output from the LINE1-TV jack.

Note that if you select “On” in step 13, you cannot
select “RGB,” and that if you select “Yes” in step 15,
you cannot select “S Video.”

To output Video signals

• Video

To output S video signals

• S Video

To output RGB signals

• RGB

If you select “S Video” or “RGB,” SMARTLINK
will be deactivated.

r

Press ENTER.

The Setup Display for selecting the type of jack used
to connect to your amplifier (receiver) appears.

s

Press

M/m to select the type of jack (if any)

you are using to connect to an amplifier
(receiver), then press ENTER.

Choose the item that matches the audio connection
you selected on pages 8 to 9 (

through

).

• If you connect just a TV and nothing else, select “No,”

then go to step 23.

• Select “Yes: LINE 2 OUT (R-AUDIO-L),” then go to

step 23.

• Select “Yes: DIGITAL OUT.” The Setup Display for

“Dolby Digital” appears.

t

Press

M/m to select the type of Dolby Digital

signal you wish to send to your amplifier
(receiver).

Choose the signal that matches the audio connection
you selected on pages 8 to 9 (

through

).

• D-PCM

• Dolby Digital (only if the amplifier (receiver) has a

Dolby Digital decoder)

u

Press ENTER.

The Setup Display for selecting the type of DTS
signal appears.

v

Press

M/m to select the type of DTS signal you

wish to send to your amplifier (receiver) and
press ENTER.

Choose the item that matches the audio connection
you selected on pages 8 to 9 (

through

).

• Off

• On (only if the amplifier (receiver) has a DTS decoder)

w

Press ENTER when “Finish” appears.

Easy Setup is finished. All connections and setup
operations are complete.

To return to the previous step

Press RETURN.

z

Hints

• If your AV amplifier (receiver) has an MPEG audio decoder, set

“MPEG” to “MPEG” (see “AUDIO Settings” in the separate booklet
“Operating Instructions”
).

• If you want to run Easy Setup again, select “Easy Setup” from “Setup”

in the System Menu.

EASY SETUP

Line1 Output

8/9

Select the Line1 output signal.

Video

S Video

RGB

EASY SETUP

Audio Connection

9/9

Is this recorder connected to an amplifier (receiver)?
Select the type of jack you are using.

Yes :

LINE2 OUT(R-AUDIO-L)

Yes :

DIGITAL OUT

No

A

D

A

B-1

C-1

B-2

C-2

D

B

D

EASY SETUP

Audio Connection

9/9

Dolby Digital

D-PCM

Dolby Digital

B-2

C-2

D

EASY SETUP

Audio Connection

9/9

DTS

On

Off

B

D

B-2

C-2

D

EASY SETUP

Easy Setup is finished

Finish

Advertising