Samsung 460P - Manual (Page 13)

for long periods.
Rear
For detailed information concerning cable connections, refer to Connecting Cables under Setup.
The monitor's rear configuration may vary slightly depending on the monitor model.
1. POWER SW : Switch the monitor on and off.
2.
POWER IN : Power cord, plug into monitor
and wall receptacle.
3. RS232C OUT/IN (RS232C Serial PORT): MDC(Multiple Display Control) Program Port
4. DVI IN(HDCP) (PC Video Connection Terminal)
: Using DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)
5. PC IN(RGB) (PC Video Connection Terminal)
: Using D-Sub Cable (15 pin D-Sub) - PC mode (Analog PC)
6. PC/DVI/BNC AUDIO IN (PC/DVI/BNC Audio Connection Terminal (Input))