Samsung HW-D550 - Manual (Page 20)

0
using the Anynet+(HDMI-CeC) function
Anynet+ is a function that enables you to control other Samsung Devices with
your Samsung TV's remote control.
Anynet+ function turns on and off each time you press
Anynet+.
1. Connect the product to a Samsung TV with the HDMI cable.
(See page 15)
2. Set the Anynet+ function on your TV. (See the TV instruction manual
for more information.)
The Anynet+ function supports some buttons of the remote control.
(TV POWER, TV INFO, TV CH)
Depending on your TV, certain HDMI output resolutions may not
work.
Please refer to the user’s manual of your TV. Please check the
logo (If your TV has an logo, then it supports
Anynet+ function.)
AuDIo button
This button enables you to select between listening to audio from your TV
or audio from the Air Track when connected via HDMI.
Press AuDIo on the remote control of this unit.
AUDiO MODE MODE Scroll Display Display
HDMi in
TV HDMI AUDIO TV SND TV
AVR HDMI AUDIO AVR HDMI
ARc
TV SOUND TV S MUTE
AVR SOUND AVR TV ARC
▪
▪
▪
POWER TV POWER
AUDIO
MUTE
TV INFO
AUTO POWER
AV SYNC
AH59-02330A
VOL TV CH
SOUND MODE 3D SOUND
S.VOL INPUT SELECT
DIMMER
S/W LEVEL
HDMI SPK CONTROL
DRC
POWER TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMI SPK CONTROL
DRC
Insert a USB drive containing the firmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The
main unit will turn off automatically after completing the firmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them after the upgrade.
If the firnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format USB data in NTFS because it is not a supported file system.
Depending on the manufacturer, the USB may not be supported. ▪
▪
▪
▪
▪
SOFTWARE UPgRADE
Samsung may offer upgrades for the Crystal Surround
Air Track's system's firmware in the future.
Please visit Samsung.com or contact the Samsung call center
to receive information about downloading upgrades and
using a USB drive.
Upgrades will be possible by connecting a USB drive to the
USB port located on your Air Track.
ONLY FOR UPDATE
ONLY FOR UPDATE
ONLY FOR UPDATE
POWER TV POWER
AUDIO
MUTE
TV INFO
AUTO POWER
AV SYNC
AH59-02330A
VOL TV CH
SOUND MODE 3D SOUND
S.VOL INPUT SELECT
DIMMER
S/W LEVEL
HDMI SPK CONTROL
DRC
POWER TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMI SPK CONTROL
DRC