Sharp SD-CX1H - Manual (Page 33)

33
CX1H_UK26-34.fm 00/12/17
RDS Ra
dio
Using the Ra
dio Data S
y
s
te
m
(RDS)

To automatically play the traffic informa-
tion (EON-TI)
When the traffic information is broadcast, the radio switches to it automatically.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("TI" "WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("TI" will go out.)
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.

"PTY TI" and "SELECT" will appear alternately for about 6 seconds.

If the EON button is pressed when "EON" is not displayed, "NO EON" will appear for 5
seconds to indicate that the unit cannot enter the EON stand-by mode.
3
Whilst they are displayed, select the TI (Traffic Information) by
pressing the TUN. PRESET or button.
4
Within 4 seconds, press the ENTER button.

"TI" and "WAITING" will appear for 2 seconds each.

"TI" will appear, and the unit will enter the EON-TI stand-by mode.
5
When a TA specified starts on an ON (other network) station, the
unit will automatically switch to that station, and "TI" will flash.
6
When the traffic announcement is over, the unit will automatically
return to the original station you were tuned to.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)