Ad v a nced fe atur es, Timer and sleep operation (continued), Sleep operation – Sharp SD-CX1H User Manual

Page 52

Advertising
background image

52

CX1H_UK49-59.fm

00/12/17

Ad

v

a

nced Fe

atur

es

Ti

mer

a

nd S

le

e

p Oper

a

ti

o

n

Timer and Sleep Operation (continued)



Sleep operation

The radio, CD, and MiniDisc can all be turned off automatically.

To confirm the remaining sleep time:



The display will return to normal after approximately 10 seconds.



You can change the sleep time.



Press the ENTER button whilst the sleep remaining time is displayed (see steps 5
- 6 on the left).

To cancel the sleep operation:

The sleep timer is cancelled when the unit enters the stand-by mode.
To cancel only the sleep timer without setting the unit to the stand-by mode, proceed
as follows.

1

Play back the desired sound source.

2

Press the TIMER/DELETE button.

3

Within 10 seconds, press the REC LEVEL/CURSOR or button
to select "SLEEP".

4

Within 10 seconds, press the ENTER button.

5

Press the REC LEVEL/CURSOR or button to specify the sleep
time.

(Maximum: 2 hours - Minimum: 1 minute)

6

Press the ENTER button.

7

Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.



The volume will be turned down 1 minute before the sleep operation finishes.

1

Press the TIMER/DELETE button whilst the sleep timer is set.

2

Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"SLEEP".

Remaining sleep time

1

Press the TIMER/DELETE button whilst the sleep timer is set.

2

Within 10 seconds, press the REC LEVEL/CURSOR or button to select
"SLEEP OFF".

3

Within 10 seconds, press the ENTER button.

Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Advertising