Symbol Technologies LS 2106 - Manual (Page 59)

4-39
Parameter Menus
Set Lengths for Discrete 2 of 5
Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or lengths within
a specific range. The length of a code refers to the number of characters (i.e., human readable
characters) the code contains, and includes check digits.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select D 2 of 5 One Discrete Length, then scan 1, 4, the
only D 2 of 5 symbols decoded are those containing 14 characters. Numeric bar codes begin
on page
4-57 . If you make an error or wish to change your selection, scan CANCEL on
page 4-59 .
D 2 of 5 - ONE DISCRETE LENGTH
Two Discrete Lengths - This option allows you to decode only those codes containing two
selected lengths. For example, if you select D 2 of 5 Two Discrete Lengths, then scan 0, 2, 1,
4, the only D 2 of 5 symbols decoded are those containing 2 or 14 characters. Numeric bar
codes begin on page
4-57 . If you make an error or wish to change your selection, scan
CANCEL on page 4-59 .
D 2 of 5 - TWO DISCRETE LENGTHS