Samsung HT-C5550 - Manual (Page 19)

English
19
02
Connections
Installing the Speakers on the Tallboy Stand
* HT-C5530 only - Front Speakers
* HT-C5550 only - Front/Surround speakers
Turn the Stand Base upside-down and
connect it to the Stand.
Insert four small screws clockwise into the four
holes marked using a screwdriver as shown in the
illustration.
Connect the upper Speaker to the assembled
Stand.
Insert another large screw clockwise into
the hole on the rear of the speaker using a
screwdriver.
1.
2.
3.
4.
4
2
Stand
Stand
Base
1
3
Stand
Speaker
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
Connect the connecting plugs to the back of the product by matching
the colours of the speaker plugs to the speaker jacks.
1.
2.
3.
Black Red
FM ANT
iPod
SPEAKER IMPEDANCE : 3
FM ANT
iPod
SPEAKER IMPEDANCE : 3
SPEAKER IMPEDANCE : 3
Front Speaker (R)
Subwoofer
Surround Speaker (R)
Surround Speaker (L)
Front Speaker (L)
Centre Speaker
In case of HT-C5500
* Refer to page 18 for the speakers of HT-C5530/C5550.
HT-C5500_ELS_ENG_0217.indd 19 HT-C5500_ELS_ENG_0217.indd 19 2010-02-18 9:22:49 2010-02-18 9:22:49