Sony ICD-UX300F - Manual (Page 40)

40 GB
4
Press v or V on the control button to
select “OFF,” and then press N /ENT.
5
Press x STOP to exit the menu mode.
6
Connect other equipment to the IC
recorder when the IC recorder is in the
stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment to
the m (microphone) jack of the IC
recorder using an audio connecting cable
(page 41)*.
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 82).
7
Press v or V on the control button to
select “Audio IN,” and then press N /
ENT.
8
Press x STOP to exit the menu mode.
9
Press z REC/PAUSE to start recording.
The built-in microphones are
automatically cut off and the sound from
the connected equipment is recorded.
10
Start playback on the piece of
equipment connected to the IC
recorder.