Sony ICD-UX300F - Manual (Page 84)

84 GB
Connecting the IC recorder
to your computer
1
Slide the USB lever on the back of the IC
recorder in the direction of the arrow,
and insert the USB connector into the
USB port of a running computer.
2
Make sure the IC recorder has been
recognized properly.
On the Windows screen; open “My
Computer” or “Computer,” and make
sure that “IC RECORDER” has been
recognized.
On the Macintosh screen; make sure that
an “IC RECORDER” drive is displayed
on the desktop.
The IC recorder is recognized by the
computer as soon as the connection is
made. While the IC recorder is connected to
the computer, “Connecting” is displayed in
the display window of the IC recorder.
If you cannot insert the USB connector of
the IC recorder into the USB port of a
computer directly, use the supplied USB
connection support cable.
P Notes
• If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
• Use of this IC recorder with a USB hub or a
USB connection support cable other than the
supplied cable is not guaranteed.
• A malfunction may occur depending on the
USB devices connected at the same time.
To USB port
IC recorder
Computer
USB connection support
cable (supplied)