Sony ICD-UX300F - Manual (Page 9)

9 GB
G
e
tt
in
g S
ta
rte
d
Step 2: Recharging the Battery
Remove the film on the display window
before you use the IC recorder.
Connect the IC recorder to a running
computer, and charge the battery until the
battery indicator indicates “
.”
When you use the IC recorder for the first
time, or after you have not used the IC
recorder for a certain period of time, charge
the battery continuously until “
” is
displayed.
It takes about 3 hours and 30 minutes to
fully charge exhausted battery.*
1
You can also charge the battery by using an
AC-U50A USB AC adaptor (not supplied),
etc.
1
Insert a rechargeable battery.
Slide and lift the battery compartment
lid, insert one NH-AAA rechargeable
battery with correct polarity, and close
the lid.
2
Insert the USB connector of the IC
recorder into the USB port of a
computer.
Slide the USB lever on the back of the IC
recorder in the direction of the arrow,
and insert the USB connector into the
USB port of a running computer.*
2
Computer
IC recorder
To USB port