Sony ICD-UX300F - Manual (Page 105)

105 GB
Tr
oub
le
sh
oot
in
g
Troubleshooting
Troubleshooting
Before taking the IC recorder for repair, check the following sections. Should any problem
persist after you have made these checks, consult your nearest Sony dealer.
Please note that recorded messages may be erased during service or repair work.
Symptom Remedy
The IC recorder cannot be
turned off. • Slide the HOLD/POWER switch in the direction of “POWER” for
more than 2 seconds when the IC recorder is stopped (page 12).
The IC recorder cannot be
turned on. • The power to the IC recorder is off. Slide the HOLD/POWER
switch in the direction of “POWER” for more than 1 second
(page 12).
The IC recorder is powered
off automatically. • When you leave the IC recorder without attempting an operation
for a certain length of time, the auto power off function will take
effect. (The length of time before auto power off is set to “10min”
when you purchase the IC recorder.) You can select the length of
time before auto power off in the menu (page 81).
Display does not disappear.
Display appears blurred. • Remove the protective film on the display window before you use
the IC recorder.
The IC recorder does not
operate. • The battery has been inserted with incorrect polarity (page 9).
• The battery is weak (page 11).
• The power to the IC recorder is off. Slide the HOLD/POWER
switch in the direction of “POWER” for more than 1 second
(page 12).
• The HOLD function is activated. Slide the HOLD/POWER switch
towards the center (page 17).
No sound comes from the
speaker. • The volume is turned down completely (page 22).
• Headphones are plugged in (page 42).
• When you are listening to the FM radio, “Audio Output” is set to
“Headphones.” Set it to “Speaker” (page 61).