Sony ICD-UX300F - Manual (Page 95)

95 GB
A
d
d
itiona
l In
for
m
at
ion
Additional Information
Using a USB AC Adaptor (not supplied)
You can charge the rechargeable battery by
connecting the IC recorder to an AC outlet
using an AC-U50AD (U.S.A. and Canada
only) or an AC-U50A (Latin America only)
USB AC adaptor (not supplied).
You can charge the battery while you are
using the IC recorder, so that it is useful
when you want to record for a long time.
When you use the IC recorder for the first
time, or after you have not used the IC
recorder for a certain time, it is
recommended that you charge the battery
repeatedly until “
” is displayed.
It takes about 3 hours and 30 minutes to
fully charge exhausted battery.*
P Note
Your dealer may not handle some of the
optional accessories. Please ask the dealer for
detailed information.
1
Connect the USB AC adaptor (not
supplied) to an AC outlet.
2
Slide the USB lever of the IC recorder
and connect the IC recorder to a USB AC
adaptor.
While the battery is charging, the
remaining battery indicator are displayed
in an animation.
Now you can use the IC recorder while
changing the battery.
* This is an approximation for the time it takes
to charge from no remaining battery power
to full battery power at room temperature. It
varies depending on the remaining power
and the condition of the battery. It also takes
more time if the temperature of the battery is
low, or if the battery is charged while you
are transferring data to the IC recorder.
USB connector of the IC recorder
USB AC adaptor
(not supplied)