Sharp PN-E802 - Manual (Page 20)

20
E
Menu item details
The menu will differ depending on the input mode.
n SCREEN
You can move the menu screen display position each time
DISPLAY is pressed.
AUTO (PC D-SUB/PC RGB)
The CLOCK, PHASE, H-POS, and V-POS are automatically
adjusted.
Pressing
performs adjustment.
Use this automatic adjustment when you use the PC D-sub
input terminal or PC RGB input terminals to display a PC
screen for the first time or when you change the setting of
the PC. (See page 27.)
CLOCK (PC D-SUB/PC RGB)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 27), make
adjustments so that no vertical stripe noise appears in it.
PHASE (PC D-SUB/PC RGB)
Adjusts sampling clock phase for applicable video.
Useful when small characters appear with low contrast and/
or there are flickers at corners.
When using the adjustment pattern (see page 27), make
adjustments so that no horizontal stripe noise appears in it.
* Adjustments to PHASE should be made only after CLOCK
has been correctly set.
H-POS
Adjust the horizontal position of the image.
V-POS
Adjust the vertical position of the image.
H-SIZE
Adjust the horizontal size of the image.
V-SIZE
Adjust the vertical size of the image.
H-RESOLUTION (PC D-SUB/PC RGB)
Sets proper horizontal resolution when the resolution of
input signals is not recognized properly. (Adjustment may be
impossible with some signals.)
V-RESOLUTION (PC D-SUB/PC RGB)
Sets proper vertical resolution when the resolution of input
signals is not recognized properly. (Adjustment may be
impossible with some signals.)
RESET
Resets the values of the SCREEN menu items to the factory
preset values.
Select “ON” and then press
MENU
.
n PICTURE
You can move the menu screen display position each time
DISPLAY is pressed.
AUTO (PC D-SUB/PC RGB)
The ANALOG GAIN and ANALOG OFFSET are
automatically adjusted.
Pressing
performs adjustment.
ANALOG GAIN (PC D-SUB/PC RGB)
Adjusts the bright portions of the video input signal.
ANALOG OFFSET (PC D-SUB/PC RGB)
Adjusts the dark portions of the video input signal.
BRIGHT
Adjusts the backlight brightness. (In PIP mode, the main side
setting is reflected in the image.)
CONTRAST
Adjusts the difference between the bright and dark portions
of the image.
BLACK LEVEL
Adjusts the entire brightness of the video signals.
TINT
Adjusts the hue. Selecting + changes the color towards
green, and selecting - changes it towards magenta.
COLORS
Adjusts the color intensity.
SHARPNESS
Adjusts the sharpness of the image.
RGB INPUT RANGE (PC DVI-D/PC HDMI/PC D-SUB/PC
RGB/AV DVI-D/AV HDMI)
Sets the RGB input signal range. When using HDMI set to
AUTO, the RGB input signal is detected automatically. Use
AUTO normally.
If the RGB input signal range cannot be set appropriately
even when using AUTO, set according to the image. When
the setting is different, images will be displayed with washed
out blacks and compressed gradients.
ADVANCED (AV input)
You can adjust more specifically. (See page 27.)
COLOR MODE
Changes the color mode on the screen. The color mode on
the screen can also be changed using a remote control unit.
(See page 17.)
* sRGB is PC input only. See page 17 for details.
(In PIP mode, the main side setting is reflected in the image.)
WHITE BALANCE
THRU .............. Displays the input signal level as is. (for PC
DVI-D/PC HDMI only)
PRESET ......... Selects the color temperature using PRESET.
USER .............. Used for adjusting R-/G-/B-CONTRAST and
R-/G-/B-OFFSET respectively.
(In PIP mode, the main side setting is reflected in the image.)
PRESET
Selects the color temperature when the WHITE BALANCE is
set to PRESET.
The setting values are shown for reference. The color
temperature of the screen varies over time.
This function is not intended to keep the color temperature
constant.
Menu Items