Menu items, Nmulti – Sharp PN-E802 User Manual

Page 23

Advertising
background image

23

E

Menu Items

SCAN MODE (AV input)
Sets the scan mode used for AV mode input.

MODE1 ............... Over-scan display

MODE2 ...............Under-scan display

MODE3 ............... Under-scan display when the input signal

is 1080i/p. Otherwise, over-scan display

* Even when MODE1 is selected, under-scan display is used when

the input signal is 1080i/p and the screen size is Dot by Dot.

POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to

switch modes from no signal to the input signal standby

mode.
COLOR SYSTEM (AV S-VIDEO/AV VIDEO)
Select the color system of the AV equipment which is

connected to AV S-video and AV video input terminal. (AUTO

/ PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43)

When AUTO is selected, the color system is automatically

set according to the input signal.
AUDIO OUTPUT (RCA)
Sets the volume of sound output from the audio output

terminals.

When set to VARIABLE 2, sound will not be output from the

built-in speaker or the external speaker terminal.

VARIABLE1 ........ You can adjust the volume using VOLUME.

VARIABLE2 ........ You can adjust the volume using VOLUME.

FIXED .................Fixes the sounds.
AUDIO LEVEL (STEREO MINI)
Selects the maximum audio input level of the audio input

terminal.
SELF ADJUST
On a PC D-SUB/PC RGB screen, specify whether to

perform screen adjustment automatically or not. When ON

is selected, the screen is automatically adjusted when its

resolution is 800 x 600 or higher and the timing of input

signals changes. “ADJUSTING” appears on the screen

during the adjustment. For images with black edges, etc.,

depending on the signal, adjustment may not be possible.

In this case select OFF. (Perform manual adjustment of the

screen.)
AUTO INPUT CHANGE
Specify whether to change inputs automatically. When ON is

selected and no signal is present in the selected input mode,

AUTO INPUT CHANGE automatically changes the selected

mode to another mode where a video signal is present.

When video signals exist in multiple input modes, the

switching priority is as follows:

PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV

VIDEO

When the PN-ZB01 (optional) is attached:

PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV

HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO

(Input mode switching may take 15 seconds or more,

depending on the connected equipment. Input signals

may not be detected properly and a priority may change,

depending on the connected equipment or video signals.)

n

MULTI

ENLARGE (See page 25.)
Sets whether or not to use the enlarge function.
ADVANCED (ENLARGE)
ENLARGE H / ENLARGE V

......... Sets the number of screen splits (number of

monitors) in the horizontal/vertical direction used for

the enlargement.

ENLARGE-POS

......... Specify the split screen to be displayed when the

enlargement function is used.

H-POS / V-POS

.........Adjust the horizontal/vertical position of the

enlarged screen.

BEZEL ADJUST
Sets whether or not to use the frame correction function.
ADVANCED (BEZEL ADJUST)
BEZEL ADJUST (TOP) / BEZEL ADJUST (BOTTOM) /

BEZEL ADJUST (RIGHT) / BEZEL ADJUST (LEFT)

......... Adjusts so that the top/bottom/left/right connecting

joints of grouped units will be displayed smoothly

when a group of monitors are aligned in multiples to

display a single image.

BEZEL (TOP) / BEZEL (BOTTOM) / BEZEL (RIGHT) /

BEZEL (LEFT)

......... Sets the frame width of the display.

Advertising
This manual is related to the following products: