Sharp PN-E802 - Manual (Page 8)

8
E
Supplied Components
If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp: 2
 Power cord: 1
 R-6 battery (“AA” size): 2
 CD-ROM (Utility Disk for Windows): 1
 Setup Manual: 1
 Cover: 2
 Cover screws (M4 with washers): 4
 Vertical sticker (Operation panel): 1
 Vertical sticker (Logo): 1
 Terminal label: 1
Used when installing the expansion board PN-ZB01 (optional).
 Cover Sharp logo: 1
Place this sticker onto the SHARP logo to cover the logo.
* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Contents
IMPORTANT INFORMATION ............................................3
DEAR SHARP CUSTOMER ..............................................4
SAFETY PRECAUTIONS ..................................................4
TIPS AND SAFETY INSTRUCTIONS ...............................6
MOUNTING PRECAUTIONS ............................................7
Supplied Components .....................................................8
Part Names .......................................................................9
Connecting Peripheral Equipment ...............................11
Connection with a PC or AV equipment .....................11
Connection when the PN-ZB01 (optional)
is attached .................................................................12
Connecting the Power Cord .........................................13
Binding Cables ...............................................................13
Removing the Handles ..................................................13
Preparing the Remote Control Unit ..............................14
Installing the batteries ................................................14
Remote control operation range .................................14
Turning Power On/Off ....................................................15
Turning on the main power.........................................15
Turning power on/off ..................................................15
Disabling power on/off operations ..............................16
Basic Operation .............................................................17
Menu Items .....................................................................19
Displaying the menu screen .......................................19
Menu item details .......................................................20
Adjustments for PC screen display ............................27
Initialization (Reset)/Functional Restriction Setting
(FUNCTION) ....................................................................28
Controlling the Monitor with a PC (RS-232C) ..............29
PC connection ............................................................29
Communication conditions .........................................29
Communication procedure .........................................29
Setting of the GAMMA user data ................................32
RS-232C command table ...........................................33
Controlling the Monitor with a PC (LAN) .....................41
Settings to connect to a LAN ......................................41
Controlling with a PC ..................................................43
Troubleshooting .............................................................49
Specifications ...............................................................51
Mounting Precautions
(For SHARP dealers and service engineers) ...............55