Step 3: connecting the audio cords/hdmi cord – Sony RDR-HXD995 User Manual

Page 25

Advertising
background image

25

H

ook

up
s and

Se
tti

n

gs

Step 3: Connecting the Audio Cords/HDMI Cord

Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or audio component such as an AV amplifier (receiver). This will enable you to
listen to sound.

* The yellow plug is used for video signals (page 22).

A

Digital audio input jack

If your audio component has a Dolby

*1

Digital, DTS

*2

, or MPEG audio decoder and

a digital input jack, use this connection. You
can enjoy Dolby Digital (5.1ch), DTS
(5.1ch), and MPEG audio (5.1ch) surround
effects.

If you connect a Sony audio component that
is compatible with the “Control for HDMI”
function, refer to the operating instructions
supplied with the audio component.

VIDEO

AUDIO

INPUT

L

R

A

B

Audio component with
a decoder

(white)

TV, projector, or
audio component

Audio/video cord
(not supplied)

: Signal flow

Coaxial digital cord
(not supplied)

to DIGITAL OUT (COAXIAL)

to LINE 2 OUT (R-AUDIO-L)

Rear (L)

DVD recorder

(red)

(yellow)*

(yellow)

(white)

(red)

[Speakers]

Front (L)

[Speakers]

to coaxial/HDMI digital input

Rear (R)

Front (R)

Subwoofer

Centre

HDMI cord
(not supplied)

to HDMI OUT

or

,continued

Advertising
This manual is related to the following products: