Monitoring system, Pilot lamps and message display information, Typical – Ski-Doo WAKE Series User Manual

Page 120

Advertising
background image

MONITORING SYSTEM

A system monitors the electronic com-
ponents of the EMS (engine man-
agement system) and other compo-
nents of the electrical system. When a
fault occurs, it sends visual messages
through the information center and/or
audible signals through a beeper to in-
form you of a particular condition.

When minor faults occur, the fault and
message/beeper will disappear auto-
matically if the condition does not exist
anymore.

Releasing throttle and letting the en-
gine returning at idle speed may allow
normal operation to come back. If it
does not work, try removing and rein-
stalling the DESS key on its post.

The electronic system will react differ-
ently depending on the fault type. In
severe failure, the engine might not be
allowed to be started. In other cases,
the engine will operate in limp home
mode (reduced speed).

When a fault occurs, see an authorized
Sea-Doo dealer as soon as possible for
inspection.

Pilot Lamps and Message
Display Information

The pilot lamps and message display
will inform you of a particular condition
or if an anomaly occurs.

smo2008-001-029_b

TYPICAL

1. Pilot lamps

smo2008-001-026_a

TYPICAL

1. Message display

PILOT

LAMPS (ON)

MESSAGE DISPLAY

DESCRIPTION

MAINT

Maintenance reminder

(12 V LOW/HI)

Low/high battery voltage

FUEL-LOW

Low fuel level

H-TEMP (EXHAUST
or ENGINE)

Engine or exhaust system overheating

CHK ENG

Check engine

118

______________

Advertising
This manual is related to the following products: