Ski-Doo WAKE Series - Manual (Page 45)

CONTROLS/INSTRUMENTS/EQUIPMENTS
WARNING
Check handlebar and correspond-
ing steering nozzle and side vanes
operation before starting. Never
turn handlebar while someone is
nearby rear of watercraft. Keep
away from steering moving parts
(nozzle, side vanes, linkage etc.).
Adjustment
GTX Limited and RXT International
Models
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, turn the
knob underneath the handlebar.
smo2008-001-007_a
1. Adjustment knob
X Package Models
The handlebar height can be adjusted
to suit rider preferences.
To perform this adjustment, see an au-
thorized Sea-Doo dealer.
Throttle Lever
All Models Except X Package
When the throttle lever is pushed, the
watercraft accelerates.
When fully
released, engine automatically slows
down to idle speed and watercraft is
gradually stopped by water drag.
smo2008-001-008_a
1. Throttle lever
2. To accelerate
3. To decelerate
Finger Throttle
X Package Only
Provides more comfortable throttle op-
eration under demanding conditions.
When pulled, the watercraft acceler-
ates. When fully released, engine au-
tomatically slows down to idle speed
and watercraft is gradually stopped by
water drag.
smo2008-001-009_a
1. Throttle lever
2. To accelerate
3. To decelerate
Engine Start/Stop Button
To start engine, depress and hold the
start/stop button. Release immedi-
ately after engine is started.
To stop engine, depress the start/stop
button. When stopped, disconnect
the DESS key from its post. It is sug-
gested to release throttle lever first.
_______________
43