Ski-Doo WAKE Series - Manual (Page 82)

SPECIAL PROCEDURES
When towing your watercraft in wa-
ter, pinch the water supply hose from
the exhaust manifold to muffler with a
large hose pincher (P/N 529 032 500).
F01B23Y
This will prevent the exhaust system
from filling which may lead to water be-
ing injected into and filling the engine.
Without the engine running there isn't
any exhaust pressure to carry the wa-
ter out the exhaust outlet.
NOTICE Failure to do this may
result in damage to the engine. If
you must tow a stranded water-
craft in water and do not have a
hose pincher, be sure to stay well
below the maximum towing speed
of 24 km/h (15 MPH).
NOTE: A red tape on the water supply
hose indicates which hose to pinch.
smo2008-001-072_a
TYPICAL
1. Supply hose with red tape
NOTICE When finished towing the
watercraft, hose pincher must be re-
moved before operating it. Failure
to do so will result in damage to the
engine.
80
______________