To empty, Typical, Removal – Ski-Doo WAKE Series User Manual

Page 66: Warning

Advertising
background image

CONTROLS/INSTRUMENTS/EQUIPMENTS

To Empty

NOTE: It is recommended to empty
ballast tanks after each use. Always
completely empty the tanks water
back to the same lake it came from,
do not transfer.

To empty ballast tanks

– Unscrew drain plugs and flush wa-

ter.

– Rinse thoroughly the tanks interior

with fresh tap water.

– When completed, close drain plugs

and tanks valve.

NOTE: It is not necessary to discon-
nect ballast tanks filling hose.

smo2008-001-050_a

TYPICAL

1. Drain plug

WARNING

NEVER tow a watercraft with water
remaining in the ballast tanks. The
weight of ballast tanks increases
the load on the trailer, the axle and
the tires, which could lead to pre-
mature wear or failure. This also
contributes to reduce the stabil-
ity of your vehicle on the road by
raising the center of gravity of the
trailer. Always completely empty
the ballast tanks before trailering.

Removal

Removal procedure is the reverse of
installation, ensure to empty tanks be-
fore removing.

64

______________

Advertising
This manual is related to the following products: