Silex technology OEM Interna Print Server SX-350 User Manual

Sx-350, Sx-350 oem internal print server, Sx-350 features and benefits

Advertising
background image

SX-350

Easy-to-Use Wireless and Wired Networking
for OEM Printers

The SX-350 is an internal multiprotocol print server designed to allow
OEM printer manufacturers and printer controller manufacturers to
easily add wired and/or wireless network printing capabilities to their
products. It is a small board-level product that mounts inside the printer
and includes:

• Centronics/IEEE1284 parallel port (40-pin ribbon cable connector)

• 802.11a/b/g wireless radio module (wireless models only)

• RJ45 Ethernet jack (autosensing 100Base-T/10Base-T)

• RS-232 serial port (for console terminal configuration)

• 3 status LEDs

• Pushbutton reset switch

The SX-350 is based on proven print server technology from
Silex Technology, Inc., the world’s leading manufacturer of OEM
print servers, so you can be assured of the highest quality and
maximum reliability.

SX-350 Features and Benefits

SIL.5657

07/30/07

B

SIL.5657

Spec

Sheet

Temp.

100%

8.5

x

11

4C

Pr

oc

ess

FEATURE

BENEFIT

40-pin Centronics/IEEE 1284 parallel port

interface to printer

802.11a/b/g wireless radio model

Compatibility with all major operating systems,

network operating systems, and printing

methods

JetAdmin and Web JetAdmin management

software support

OEM can use standard cabling to connect

SX-350 with little or no hardware or firmware

modifications required in the printer

Allows OEM to network portable printers and to

locate printers where cabling is difficult or

impossible

OEM can sell his printers into virtually any type

of customer environment

Allows OEM printers to be managed by the

world’s most popular printer network

management software

Sophisticated security features, including

802.1X authentication, plus all major wireless

security protocols

Allows OEM to sell printers into virtually any

type of customer network

UART (RS-232) serial port

Provides a method for configuring the print

server without a network connection; can also

be used as an interface to the printer’s front

panel configuration subsystem

SX-350 OEM Internal

Print Server

Complete internal OEM network
printing solution

802.11a/b/g wireless and

100Base-T/10Base-T Ethernet

Works with all major operating systems

and network operating systems

Minimal hardware and firmware

changes required in OEM printer

5

Untitled-2 1

8/2/07 9:53:30 AM

Advertising