Error displays/messages – Sony CDX-R3350 User Manual

Page 18

Advertising
background image

18

CDX-R3350C/R3350

2-515-510-21 (1)

H:\Data Disk\2515510211\251551021CDXR3350CR3350EUR\01GB02CD-EUR.fm

masterpage:Left

Error displays/Messages

Radio reception

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the power
supply lead of a car’s aerial booster (only when
your car has built-in FM/MW/LW aerial in the
rear/side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Press (SENS) until “LOCAL-ON” appears.

t Tuning does not stop at a station:

Press (SENS) repeatedly until “MONO-
ON” or “MONO-OFF” (FM), or “LOCAL-
OFF” (MW/LW) appears.

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication
flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Press (SENS) to set the monaural reception

mode to “MONO-ON.”

An FM programme broadcast in stereo is
heard in monaural.

The unit is in monaural reception mode.
t Press (SENS) untill “MONO-OFF” appears.

RDS

The SEEK starts after a few seconds of
listening.

The station is non-TP or has weak signal.
t Deactivate TA (page 9).

No traffic announcements.

• Activate TA (page 9).
• The station does not broadcast any traffic

announcements despite being TP.
t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme

type.

BLANK

*

1

*

3

Tracks have not been recorded on the MD

*

2

.

t Play an MD with recorded tracks.

ERROR

*

1

• The disc is dirty or inserted upside down.

*

2

t Clean or insert the disc correctly.

• The disc cannot play because of some problem.

t Insert another disc.

FAILURE

The speaker/amplifier connection is incorrect.
t See the supplied installation/connections

manual to check the connection.

LOAD

*

3

The changer is loading the disc.
t Wait until loading is complete.

L.SEEK +/–

The local seek mode is on during automatic
tuning.

NO AF

There is no alternative frequency for the current
station.
t Press (SEEK) +/– while the station name is

flashing. The unit starts searching for another
frequency with the same PI (Programme
Identification) data (“PI SEEK” appears).

NO DATA

*

3

All custom names have been deleted, or none are
stored.

NO DISC

*

3

The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.

NO ID3

ID3 tag information is not written in the MP3
file.

NO INFO

Text information is not written in the ATRAC3/
ATRAC3plus file.

NO MAG

*

3

The disc magazine is not inserted in the CD
changer.
t Insert the magazine in the changer.

NO MUSIC

The disc is not a music file.
t Insert a music CD in this unit or MP3

playable changer

*

3

.

NO NAME

A track/group/disc name is not written in the
track.

NO TP

The unit will continue searching for available TP
stations.

Advertising
This manual is related to the following products: