Samsung SYNCMASTER 901B - Manual (Page 16)

(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the power cord for your monitor to the power port on the back
of the monitor.
2. DVI port Connect the DVI cable to the DVI port on the back of your Monitor.
3. D-sub 15-pin port Connect the D-sub cable to the 15-pin, D-sub connector on the back
of your monitor.
4. Kensington Lock The Kensington lock is a device used to physically fix the system
when using it in a public place.
(The locking device has to be purchased separately.)
For using a locking device, contact where you purchase it.
See Connecting the Monitor for further information regarding cable connections.