Sony PS2 - Manual (Page 9)

9
GB
Game / Audio CD
When not intending to play a game for an
extended period of time
Turn the power off at the MAIN POWER
switch on the back of the console, and
disconnect the AC power plug from the
electrical socket.
Changing from one game to
another
There is no need to turn off the console when
you want to change games.
1
...... Press the A button.
The disc tray opens.
2 ...... Remove the disc.
3
...... Place a new disc in the disc tray.
4
...... Press the A button.
The disc tray closes.
5 ...... Press the 1/RESET button briefly to reset.
(Warning: holding the 1/RESET button
down for any length of time may cause the
console to go into standby mode.)
After the start-up screens appear, screen
2
or 3 appears and the game begins.
Tip
With a multi-disc game, follow steps 1 through 4 to switch
discs. Refer to the software manual for details.
1,4
5
2,3
Differences between the Analog
Controller (DUALSHOCK
® 2) and
Analog Controller (DUALSHOCK ® )
1 Analog Controller (DUALSHOCK ® 2)
(supplied / sold separately)
•The Analog Controller (DUALSHOCK ® 2) can
be used with PlayStation ® 2 and PlayStation ®
format software.
•You can switch between digital and analog
modes. When the controller is in analog
mode, the following buttons and sticks may
operate in analog fashion depending on the
features supported by the software title. Refer
to the software manual for details.
PlayStation ® 2 format software
Directional buttons / ¢ , a , ✕ , s buttons /
left analog stick / right analog stick / L1, R1,
L2, R2 buttons
PlayStation ® format software
Left analog stick / right analog stick
•You can enjoy the vibration function.
2 Analog Controller (DUALSHOCK ® )
(sold separately)
•The Analog Controller (DUALSHOCK ® ) can
be used with PlayStation ® 2 and PlayStation ®
format software.
•You can switch between digital and analog
modes. When in analog mode, you can enjoy
the analog operation of the left analog stick
and right analog stick.
PlayStation ® 2 format software
Left analog stick / right analog stick
PlayStation ® format software
Left analog stick / right analog stick
•You can enjoy the vibration function.
Mode switching and the mode
indicator
The Analog Controller (DUALSHOCK ® 2) and
Analog Controller (DUALSHOCK ® ) can be
switched between digital mode and analog
mode by pressing the ANALOG mode button.
Each time the ANALOG mode button is
pressed, the mode changes as follows:
Digital mode (indicator : off)
Xx
Analog mode (indicator : red)
Note
Switch to the appropriate mode for use.
Note however, that some software makes this adjustment
automatically. In such cases, the ANALOG mode button is
overridden by the software. For details, refer to the
software manual.
Using the Analog Controller
Analog mode (indicator : red) Digital mode (indicator : off)
L1 button
L2 button R2 button
START
button SELECT
button
R1 button
¢ button
✕ button
Directional
buttons
s button
a button
* The R3 button and the L3 button function when the stick is pressed.
Right analog stick /
R3 button*
Mode indicator: Red
ANALOG mode button
L1 button
L2 button R2 button
¢ button
✕ button
Directional
buttons
START
button SELECT
button
s button
a button
R1 button
Mode indicator: Off ANALOG mode button
Rotate the analog sticks once with your thumbs as
if drawing a circle, as shown in the diagram above.
Do not twist the analog sticks.
Left analog stick /
L3 button*
Vibration function
The Analog Controller (DUALSHOCK ® 2) and
Analog Controller (DUALSHOCK ® ) both
feature a vibration function when the function
is supported by the software title. The vibration
function can be set to ON or OFF on the
software option screen.
Notes
• When the Analog Controller (DUALSHOCK®2) and
Analog Controller (DUALSHOCK®) is not being used,
turn the console off or unplug the controller from the
console.
• Before using the vibration function, please read “Notes
on safety when using the Analog Controller
(DUALSHOCK®2) and Analog Controller
(DUALSHOCK®)” on page 2.
Before using the Analog
Controller (DUALSHOCK
® 2) and
Analog Controller (DUALSHOCK ® )