Samsung SF-750 Series - Manual (Page 39)

B ASIC F UNCTIONS 2.6
Receiving a Fax
About the Receiving Modes
• In Fax mode, the machine answers an incoming fax call and
immediately goes into the fax reception mode.
• In Tel mode, you can receive a fax by pressing On Hook Dial (you can
hear a fax tone from the remote machine) and then pressing Start
Copy/Fax on the control panel of your machine. You can also pick up
the handset of the extension phone and then press the remote receive
code; see page 2.8.
• In Ans/Fax mode, the answering machine answers an incoming call,
and the caller can leave a message on the answering machine. If the fax
machine senses a fax tone on the line, the call automatically switches to
Fax mode.
• In DRPD mode, you can receive a call using the Distinctive Ring Pattern
Detection (DRPD) feature. “Distinctive Ring” is a telephone company
service which enables a user to use a single telephone line to answer
several different telephone numbers. For further details, see page 2.8.
The current receiving mode displays when the machine is in Standby mode.
When the memory is full, the receiving mode automatically switches to Tel.
N OTES
:
• To use Ans/Fax mode, attach an answering machine to the EXT jack on the
back of your machine. See page 1.10.
• If you do not want other people to view your received documents, you can
use Secure Receiving mode. In this mode, all of the received faxes are stored
in the memory. For further details, see page 4.2.
Loading Paper for Receiving Faxes
Faxes can only be printed on Letter-, A4- or Legal-sized 20lb(75g/m 2 )plain
paper. For details about loading paper and setting the paper size in the tray,
see page 1.8 and page 1.15.
The paper level indicator on the front of the paper tray shows the amount
of paper currently left in the tray. When the tray is empty, the indicator of
the bar is lowered.
Paper empty ➐
❷☎Paper full