Samsung SF-750 Series - Manual (Page 88)

A.3
A
5 Plug the interface cable of the tray into the optional tray connector on
the back of the machine.
6 Load paper in the optional paper tray. The instructions for loading
paper in this tray is the same as you would when loading the standard
paper tray. See page 1.8.
7 Reconnect the cords and then turn the machine on.
Setting the Paper Type and Size for Tray 2
After installing the optional Tray 2 and loading paper in the tray, you need
to set the paper type and size using the control panel buttons.
1 Press Menu.
The display shows “Paper Setting” on the top line and the first menu
item, “Paper Type,” on the bottom line.
2 Press Enter to access the menu item.
3 Use the scroll button (
➛
or
❿
) to find the paper type you are using and
press Enter to save it.
4 Press the
❿
button to scroll to “Paper Size” and press Enter to access
the menu item.
5 Press the scroll button (
➛
or
❿
) until “Tray 2 Size” appears on the
bottom line.
6 Use the scroll button (
➛
or
❿
) to find the paper size you are using and
press Enter to saves it.
To return to Standby mode, press Stop/Clear.