Samsung HCM4215W - Manual (Page 53)

C HAPTER F OUR : S PECIAL F EATURES
4.10
Viewing Picture-in-Picture
You can use the PIP feature to simultaneously watch two video sources.
Note:
The PIP feature does not work with Component1, Component2, Component3 mode.
When PIP is selected in the Zoom mode, the Mode is automatically converted
into the Normal mode.
Activating Picture-in-Picture
1
Press the Menu button.
Press the CH button to
select “PIP”, then press
the VOL + button.
PIP : Off
PIP
2
Press the VOL + or VOL -
button to select PIP
“On”.
Press the Menu button
to exit.
PIP : On
SOURCE : TV
Size : Double Screen
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
▼
Quick way to access the PIP
menu: Simply press the “PIP”
button on the remote control.
▼
If you turn TV off while
watching and turn it on again,
the PIP window will disappear.
Notes
• Picture-in-Picture doesn’t function when the V-chip is active.
• Screen size cannot be changed in the PIP mode.
• The PIP feature doesn’t work with Component1 or Component2, 3 signals.
• When the cable box output is connected to ANT-B, it cannot be viewed in the PIP window.
• Double Window isn't available on models HCM5525W/HCL4715W/ HCM4215W/
HCM4216W/PCL5415R.
S P E C I A L F E AT U R E S