Fcc part 68 (if fitted with a modem device.) – Samsung Q46 User Manual

Page 27

Advertising
background image

6

Caution

Wireless devices are not user serviceable. Do not

modify them in any way.
Modification to a wireless device will void the

authorization to use it. Contact manufacturer for

service.

Caution

FCC Statement for Wireless LAN use:
“While installing and operating this transmitter and

antenna combination the radio frequency exposure

limit of 1mW/cm2 may be exceeded at distances

close to the antenna installed. Therefore, the user

must maintain a minimum distance of 0cm from

the antenna at all times.
This device can not be colocated with another

transmitter and transmitting antenna.” (This

Statement is not applicable to UMPC(Ultra Mobile

PC) such as PDA, Portable PC.)

FCC Part 68

(If fitted with a modem device.)

This equipment compiles with part of the FCC rules.

On the back of this equipment is a label that contains,

among other information, the FCC registration number

and ringer equivalence number (REN) for this equipment.

If requested, this information must be provided to the

telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is

provided with this equipment. This equipment is designed

to be connected to the telephone network or promises

wiring using a compatible modular jack which is Part 68

compliant. See Installation Instructions for details.

The REN is used to determine the quantity of devices

which may be connected to telephone line. Excessive

RENs on the telephone line may result in the devices

not ringing in response to an incoming call. In most, but

not all areas, the sum of RENs should not exceed five

(5.0). To be certain of the number of devices that may be

connected to a line, as determined by total RENs, contact

the local telephone company to determine the maximum

REN for the calling area.
If the terminal equipment causes harm to the telephone

network, the Telephone Company will notify you in

advance that temporary discontinuance of service may

be required. But if advance notice is not practical, the

telephone company will notify the customer as soon as

possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its

facilities, equipment, operations, or procedures that could

affect the operation of the equipment. If this happens,

the telephone company will provide advanced notice in

order for you to make necessary modifications to maintain

uninterrupted service.
If trouble is experienced with this equipment (Modem)

for repair or warranty information, please contact your

local distributor. If the equipment is causing harm to the

telephone network, the telephone company may request

that you disconnect the equipment until the problem is

resolved.
The user must use the accessories and cables supplied

by the manufacturer to get optimum performance from the

product.
No repairs may be done by the customer.

Advertising
This manual is related to the following products: