Samsung Q46 - Manual (Page 177)

176
Q
The Korean or Chinese characters in a business
card received via Bluetooth are broken
A1 If you send a business card including Korean
or Chinese characters by selecting a Select a
business card in the file (*.vcf, *.vcd) option, the
characters on the received card will be broken.
This is because the contents of the business card
file are not set to Korean or Chinese characters
(CHARSET). To resolve this problem, edit the
contents of the business card file manually as
follows.
 Right-click over a business card file (*.vcf, *.vcd)
to be sent and select Connect Program >
Select Program.
 Select Notepad from the program list.
 Edit the file as follows.
Example) “N:Magic Sens” =>
“ N;CHARSET=KS_C_5601:Magic Sens”
For Korean, add “CHARSET=KS_C_5601”
For Chinese Simplified (CHS), add
“CHARSET=gb2312”
For Chinese Traditional (CHT), add
“CHARSET=Big5”
A2 Perform Send business card immediately in the
Address Book of Microsoft Outlook or select
Transmission by Outlook business card selection,
and you will be able to transmit a business card
without broken characters and without editing the
VCF file.
Bluetooth
Q
When no headset is found or cannot be
connected
A1 If the headset is already connected to another
device, you will not be able to find the headset and
cannot connect to the headset even if the headset is
found. Disconnect the connection to the other device
and then start the search again.
A2 If the headset is connected to a power adapter, you
cannot make a Bluetooth connection.
Disconnect the power adapter and then retry.
A3 In general, a Bluetooth headset has 2 operating
modes, On/Off mode and Pairing mode.
To connect the headset to another Bluetooth device
such as a PC or cell phone, the headset must be in
Pairing mode.
Switch the headset to Pairing mode and then retry
the search operation.
In general, the headset in Pairing mode automatically
returns to On/Off mode after a certain period of time.
Q
There is no sound or sound is intermittently
interrupted after connecting a headset
A1 If your headset is a mono headset, check
if a mono headset connection has been
made. In this case, to resolve the problem,
complete the procedures below.