Samsung HMX-Q11TP - Manual (Page 27)

27
Basic operation of the camcorder
Drag
Drag the touch screen to up, down, left, or right to select the desired
items or files.
Do not place any protective film on the LCD screen.
If you leave a film attached for a long while, strong adhesion between
the film and the surface of the screen may cause a malfunction of the
touch screen. •
•
Be careful not to accidentally press the button near the LCD screen
while using the touch screen.
The tabs and indicators that appear on the LCD screen depend on
the current recording/playback status of your camcorder.
The camcorder does not recognise touches if you touch more than two
points on the screen at the same time. Touch one point at a time. •
•
•
Switching the information display mode
You can switch the on-screen information display mode.
Each time you touch the LCD screen, the full and minimum display
modes alternate.
Full display mode
Minimum display mode
STBY 00:00:00 [253Min]
STBY
Warning indicators and messages may appear, depending on the
recording conditions.
¬pages 93~97