Samsung HMX-Q11TP - Manual (Page 21)

21
Getting started
INSERTING/EJECTING THE BATTERY
Battery release switch
To insert the battery
1
Slide and open the battery slot cover as shown in the figure.
2
Insert the battery into the battery slot until it locks.
Make sure that the SAMSUNG logo is facing down and the
battery is placed as shown in the figure.
3
Close the battery slot cover.
•
To eject the battery
1
Slide and open the battery slot cover as shown in the figure.
2
Slide the Battery release switch in the direction as shown in the
figure and pull out the battery.
3
Close the battery slot cover.
Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger
of overheating, fire, or explosion.
Purchase extra batteries to allow continuous use of your camcorder. •
•