Sennheiser Diversity Receiver EK 100 G3 - Manual (Page 13)

12
Using the operating menu
Working with the operating menu
By way of example of the “ Frequency Preset ” menu, this section describes
how to use the operating menu.
Changing from a standard display to the operating menu
Selecting a menu item
Changing and storing settings
Extended menu “Advanced Menu”
Tune Sets the receiving frequencies for the
frequency bank “
U ”
16
Sets the channel and the receiving frequency
for the frequency bank “
U ”
17
Pilot Tone* Activates/deactivates the pilot tone evaluation 18
LCD Contrast Adjusts the contrast of the display panel 18
Reset Resets the settings made in the operating
menu
18
Software Revision Displays the current software revision 18
Exit Exits the extended menu “ Advanced Menu ”
and returns to the main menu
–
If the lock mode is activated, you have to deactivate it In order to
be able to work with the operating menu (see page 10).
̈
Press the SET button.
The current standard display is replaced by the main menu.
The last selected menu item is displayed.
̈
Press the rocker button to change to the “ Frequency Preset ”
menu item.
The current setting of the selected menu item is displayed:
̈
Press the SET button to call up the menu item.
̈
Press the rocker button to set the frequency bank.
̈
Press the SET button to confirm your selection.
̈
Press the rocker button to set the channel.
̈
Press the SET button to store the setting.
Display Function of the menu item Page
SET
Menu
Frequency Preset
B.Ch: 1. 1
Menu
B.Ch: 1. 1
Frequency Preset B.Ch:
823.925MHz
Frequency Preset
1 . 1 B.Ch:
Frequency Preset
“Stored”
SET SET
SET
2. 2
823.925MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
SET
SET
SET