Sennheiser Diversity Receiver EK 100 G3 - Manual (Page 4)

3
The EK 100 G3 diversity receiver
The EK 100 G3 diversity receiver
This diversity receiver is part of the evolution wireless series generation 3
(ew G3). With this series, Sennheiser offers high-quality state-of-the-art
RF transmission systems with a high level of operational reliability and
ease of use. Transmitters and receivers permit wireless transmission with
studio-quality sound.
Features of the evolution wireless 100 G3 series:
• Optimized PLL synthesizer and microprocessor technology
• HDX noise reduction system
• Adaptive diversity technology
• Switching bandwidth of 42 MHz
• Scan function (Easy Setup) for scanning the frequency banks for unused
channels
Adaptive diversity
This diversity receiver uses the ground connection of the line cable as its
second antenna to provide improved reception.
The frequency bank system
The diversity receiver is available in 6 UHF frequency ranges with
1,680 receiving frequencies per frequency range:
Each frequency range (A–E, G) offers 21 frequency banks with up to
12 channels each:
Each of the channels in the frequency banks “ 1 ” to “ 20 ” has been factory-
preset to a fixed receiving frequency (frequency preset). The factory-
preset frequencies within one frequency bank are intermodulation-free.
These frequencies cannot be changed.
For an overview of the frequency presets, please refer to the supplied
frequency information sheet. Updated versions of the frequency informa-
tion sheet can be downloaded from the EK 100 G3 product page on our
website at www.sennheiser.com.
The frequency bank “ U ” allows you to freely select and store receiving
frequencies. It might be that these receiving frequencies are not intermod-
ulation-free (see page 19).
516 – 558 566 – 608 626 – 668 734 – 776 780 – 822 823 – 865
Range A: Range G: Range B: Range C: Range D: Range E:
Frequency bank 1 ... 20
Frequency bank U
Channel 12 – frequency preset
Channel 1 – frequency preset
Channel 2 – frequency preset
Channel 12 – freely selectable frequency
Channel 1 – freely selectable frequency
Channel 2 – freely selectable frequency