Sony R5 - Manual (Page 34)

34
Other functions
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, fader
and subwoofer volume.
1
Select a source, then press (SOUND)
repeatedly to select the desired item.
The item changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear) t
SUB (subwoofer volume)*
* “
∞
” is displayed at the lowest setting, and can be
adjusted up to 20 steps.
2
Press < / , repeatedly to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
With the main unit
In step 2, to adjust the selected item, press the volume
+/– button.
Adjusting the equalizer curve
— EQ7 Tune
You can adjust and store the equalizer settings
for different tone ranges.
1
Select a source, then press
(SYSTEM MENU) .
2
Press M / m repeatedly until “EQ7
TUNE” appears, then press (ENTER) .
3
Press < / , repeatedly to select the
desired equalizer type, then press
(ENTER) .
4
Press < / , repeatedly to select the
desired frequency.
The frequency changes as follows:
62Hz y 157Hz y 396Hz y 1kHz y
2.5kHz y 6.3kHz y 16kHz
5
Press M / m repeatedly to adjust the
desired volume level.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 4 and 5 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold (ENTER).
6
Press (ENTER) .
The setting is complete and the display
returns to normal play/reception mode.
SRC MODE
ATT DVD
SOUND
TOP MENU MENU
SETUP
ENTER
SYSTEM
MENU
LIST
EQ Z × Z DSO EQ7
PICTURE
AUDIO SUBTITLE ANGLE
OFF
+
–
SOUND
</,
SRC MODE
ATT DVD
SOUND
TOP MENU MENU
SETUP
ENTER
SYSTEM
MENU
LIST
EQ Z × Z DSO EQ7
PICTURE
AUDIO SUBTITLE ANGLE
OFF
+
–
ENTER
SYSTEM
MENU
M/m
</,