Shindaiwa 68002-94310 - Manual

No perform ance guaran tee without u sing genuine Shin daiwa blade s. No-load rev olution spee d: 4180 min-1 (rpm) Use reinforc ed abrasive b lades with m aximum useable perim eter velocity of 248 ft/se c.
USE ONLY G ENUINE SHINDAIWA BLADES
EC7500 Maximum b lade diamete r: 12 in. Maximum b lade thickne ss: 0.16 in. Arbor diam eter: 1 inch
SHINDAIWA OWNER’S AND
OPERATOR’S MANUAL
EC7500/EC7600
ENGINE CUTOFF
SAW
WARNING!
■ Read this manual and familiarize yourself with its contents.
■ This unit is designed primarily for cutting construction materials and metal
according to the type of cutting wheel installed.
■ To minimize the risk of injury to yourself and others, always wear hearing
protection, a dustproof mask, goggles and a helmet when operating this unit.
■ Keep this manual handy so you can refer to it when required.
Part Number 68002-94310 Rev. 12/02
(EPA VERSION)
Shindaiwa Inc.
11975 SW Herman Road
Tualatin, Oregon 97062
Telephone 503-692-3070
Fax
503-692-6696
www.shindaiwa.com
Shindaiwa Kogyo Co., Ltd.
6-2-11 Ozuka-Nishi
Asaminami-Ku, Hiroshima
731-3167, Japan
Telephone 81-82-849-2220
Fax
81-82-849-2481
©2002 Shindaiwa Inc.
Part Number 68002-94310
Shindaiwa is a registered
trademark of Shindaiwa Inc.